The bronze art lost wax casting Sacrificial Sandalwood burner in art mausoleum
The bronze art lost wax casting Sacrificial Sandalwood burner in art cemetery is molded from bronze which is a vertical incense burner like a pavilion with a round roof, hexagonal body and three legs' round tripod in bottom. It is usually used for outdoor worship, and only opens a door to avoid rain or wind. When burning, smokes flying from window.
We could also supply a Europe style artwork like this with the same quality and fabric according to the demand of customers.
Flash above and pictures under this paragraph shows the detail of art sculpture bronze casting, art sculpture lost wax casting. We could also supply European style lost wax bronze castings in mausoleum according to your design or requirements with the same upscale quality and superb technology as showed in the flash and pictures.
¡¡¡¡ Art sculpture lost wax investment casting Sacrificial sandalwood burners in the art cemetery, worships in ancient are mainly burning wood and offerings as "Book" recorded. Chinese ancients' burning wood in worship is a behavior of worship, but a precursor of worship to later.
There is a wide range of art sculpture lost wax investment casting Sacrificial sandalwood burner with ever-changing-type, but usually tripod-style incense burner in worship. For example, round tripod (three legs), square tripod (four legs), two front-ears (before the door), two side-ears (in side) or no ears. It is also different from have a roof or not.The bronze art lost wax casting Sacrificial sandalwood burners or incense burners with style of this picture usually are molded from bronze with sleek overall and gorgeous, magnificent engraving. When burning, smokes fly out of the window, enhances a sense of solemn.
Pavilion style vertical incense burner around structure roof in art cemetery, six groups of decorating animals be scattered evenly with unique design. Eaves are made up of around drip with lotus leaf patterns and hook head with lotus patterns. The square wood under eaves is …e pattern.
Picture in left shows decorative animal patterns in celebrity art cemetery sacrificial sandalwood burners. It is different from traditional style of singular dragon, phoenix, lion, Pegasus. All of these animal decorations and patterns are more artistic, displaying a rich sense of imagination and superb design-capability, reflects the deep culture of ancient Chinese nation, presents a new glorious page in the history of Chinese architecture.
Picture in right shows the art sculpture bronze investment casting sacrificial sandalwood burners in celebrity art cemetery with a precious top. It is an enlarged map, with a …e pattern under the square wood eaves.
Picture in left shows round bronze investment casting sacrificial sandalwood burner roof in art cemetery.
The cover of the bronze art lost wax investment casting sacrificial sandalwood burner is similar to the roof of the pavilion. Six groups of decorating animals are scattered evenly, and eaves are made up of around drip.
After casting, the shell must be cooled down, then cleaned and pruned to get a smooth casting product. After removing the shell mechanical methods, an electric cutting tool is useful remove water riser.
The art sculpture bronze lost wax investment casting sacrificial sandalwood burner is a pavilion style vertical incense burner with hexahedral structure. Hexagonal column frame is carved with curly grass patterns and only a single-bay front, top of bay stands symmetrical phoenix, Peony patterns hanging on middle, fungus flowers and convex bat pattern on back. The remaining four frames are carved with the patterns of four seasons scenes, the upper and lower side are colorful clouds.
Picture in left and right are art sculpture bronze casting sacrificial sandalwood burners with hexahedral structure. Both sides of frame are four scenes of spring, summer, autumn and winter and middle is winter plum flower.
Picture in middle shows hexagonal pavilion investment casting model wax component of the art sculpture bronze investment casting sacrificial sandalwood burners in the celebrity art cemetery.
According to the size, quality requirements and performance characteristics, the investment casting material of artwork should meet the following technical characteristics: Suitable melting temperature and solidification temperature range, small thermal expansion and contraction rate, high heat resistance and other thermo physical properties; suitable strength, hardness, ductility and toughness and other mechanical properties; small viscosity when liquid , appropriate liquidity when molding and other process performance.
General melting wax mold materials formula includes paraffin wax, floor wax, beeswax, modified rosin, low molecular weight polyethylene, EVA, hard grease acid, grease, etc.
Art sculpture bronze investment casting sacrificial paper burners in art cemeteries
Picture in right shows lotus that decorated on lower abdomen of hoist. It is designed to general and abstract lotus patterns and manufactured carefully from wax sculpture mud by famous sculptor.
Lotus is perennial aquatic plants which also is called lotus flower, jade ring, water Lotus and so on. It has many species, and usually one stem one flower, one flower one heart. The ancient usually called lotus of one flower with two heart "auspicious lotus", as a symbol of pure love.
Picture in right shows silicone rubber die reproduction process of the art sculpture bronze investment casting sacrificial paper burners hexagonal pavilion body in celebrity art cemetery.
Usually, repairing and maintaining occur after sculpture model have been produced because of the complex of art casting patterns. It has an excellent simulation, mold release, anti-aging and certain tensile strength and low shrinkage, and the molding process is simple.
Picture in left shows mold shell of the art sculpture bronze investment casting sacrificial paper burners hexagonal pavilion body in celebrity art cemetery.
After the process of dipping, brushing paint, sanding, drying and hardening, shell also need to be melted, which is usually referred to as lost wax. High pressure steam is a main selection method of lost wax.
To make a wax cast, molten wax is painted into the rubber mould, taking care not to trap any air pockets in the surface and is gradually built up to an even thickness. After trimming any excess from the edges, the sections of the mould are assembled and through an aperture made for the purpose, cooling molten wax is poured in and then out of the mould. This leaves a thin deposit of wax three to six millimeters thick which unites the previously separate sections of wax. Once cool, the mould is opened and the flexible rubber peeled off the wax to reveal a perfect reproduction of the original sculpture. The thickens of the wax will determine the thickness of the bronze.
Joints and scams where different sections of the mould join, need to be filled and the texture on them restored. When this modeling is completed as carefully as the original sculpture was made, the finished wax is ready for the next process and can be moulded in a refractory mould. A system of wax rods (runners) are welded to the wax with a hot knife. These will allow metal to run into the sculpture. Smaller rods (risers) allow the air to escape as the metal runs in. Core pins, previously pushed through the wax at strategic points, will ensure that the ceramic walls will not collapse when the wax is 'lost' To get fine smooth casting surface and perfectly beautiful patterns, a last fine abrasive sand blasting is essential.
The bronze art lost wax casting Sacrificial sandalwood burners of art cemetery are produced independently as three separate parts according to the needs of casting process, Lower part is the three-legged tripod incense burner and disc base with double-liters cloud and sea, cliff, river patterns. Furnace body decorates with ganoderma cloud, flying bats, which are convex and structured, highlighting the beauty and majesty. The top of the burner decorates with a round of …e patterns.
The bronze art lost wax investment casting sacrificial sandalwood burners, whose bottom decorate with disc basement and three-legged round tripod incense burner on both sides of which stands an ear.
Picture in right shows decorative ganoderma cloud, flying bats and sea, cliff, river patterns. It is usually precisely mounted to the dome shape of the incense burner one by one with a binder after copying. In the last, an overall sculpture trimming is essential to made it a perfect dome incense burner model.
Picture in left shows bronze art lost wax investment casting incense burner body decorates with ganoderma cloud and flying bats, which are convex and structured, highlights the peaceful Swiss, harmonic auspicious. The bat fly in cloud reflects heaven-sent blessing too.
The round tripod incense burner disc base model investment wax component under art sculpture bronze art lost wax investment casting sacrificial sandalwood burners.
Picture in left shows the round tripod style three legs and two ears shell of art sculpture bronze investment casting sacrificial sandalwood burners manufacturing process. The melting casting mold is often referred to as shell with the function of obtaining smooth and accurate casting.
The silica is a high quality adhesive commonly used in the production of investment castings.
Picture in middle shows hexagonal pavilion body casting in middle of art sculpture bronze investment casting sacrificial sandalwood burners.
The material of investment casting artworks usually is bronze. The best feature of bronze is it has a high corrosion resistance in the atmosphere. What's more, the bronze has the feature of low melting point, better casting performance, and good "mechanical properties".
We could also supply a Europe style artwork like this with the same quality and fabric according to the demand of customers.
Picture in right shows casting sample crafts that used for testing data.
